best cot mattressA CLOSER LOOK AT QUALITY
← Back to the best cot mattress guide

Let’s chat about coir and wool

The coconut connection: understand coir, wool and the construction beneath the cover.

04

Let’s chat about coir — the coconut connection.

Coir is the tough fibre from a coconut’s outer husk. The hairy bit, if you like. An unlikely ingredient for a baby mattress? Perhaps, but it has a useful job to do.

Those fibres can be formed into a firm sheet, often bonded with natural latex to hold them together. The fibres are processed and formed into layers, then cut to the size needed for the mattress. We don’t need a tour of the whole factory to understand the basic idea.

A solid coir core can feel very firm — almost brick-like. The wool provides a cushioning layer over that core, while the finished sleeping surface still needs to remain firm and flat.

And the wool? We know who supplies that.

The sheep deserve a mention.

In this construction, wool takes the place of the foam layers we discussed earlier. It sits on the top and bottom of the coir core, beneath the mattress’s cover — not around the sides. The exact thickness of each layer depends on the design.

What interests me is how the materials work together: the coir core, the wool layers, the cover and the waterproof protection. Ask what each part contains and how the complete mattress is put together.

Two basic coir constructions to understand.

The first is straightforward: a solid coir core, with wool on the top and bottom.

The second has a spring unit inside a coir enclosure. There’s a layer of coir above and below the springs, plus a firm coir frame around the full perimeter. Wool then goes over the top and underneath the bottom — not around the edges.

In the sprung construction I’m describing, that perimeter frame is at least 6cm wide, so the springs stop short of the mattress edge. The firm coir border supports the edges when our smiling Jumping Jack starts giving them a workout.

So the difference is simple: a solid coir core, or springs enclosed in coir — both with wool on the top and bottom.

A material I rate for durability.

In my experience, most manufacturers making this type of mattress use good-quality coir, and I would expect a well-made coir mattress to provide at least five years of service with appropriate care.

I’ve even heard from customers whose mattresses are now being used for their third baby. That’s their reported experience, rather than a promise for every mattress — its condition and the manufacturer’s instructions still matter.

And that brings us to the phrase “new baby, new mattress”. We’ll come back to that later.

Coir, with a spring in its step.

That brick-like feeling got me thinking: could I keep the coir, but change the construction to introduce more give?

So I developed a different approach. Instead of metal springs inside the coir enclosure, I used individual springs made from coir and natural latex. The surrounding coir and wool remain part of the construction.

Picture a spring unit with 200 metal springs. Now imagine replacing them with individual coir-and-natural-latex springs, arranged closely together. That’s the idea behind my design: changing the springs themselves, rather than simply adding natural fillings around metal springs.

I developed this natural spring core for The Cot Mattress Company, which I own. You’ll find it in our mattress called The Excellence. Take a closer look at the natural spring design →

Natural materials still need practical care.

Wool isn’t a substitute for waterproof protection. Whatever is inside the mattress, keep spills away from the core and follow the cleaning instructions. The finished mattress needs a firm, flat sleeping surface, with suitable waterproof protection. Read The Lullaby Trust’s mattress guidance.

← Back to all mattress topics

KEEP EXPLORING

What would you like
to look at next?